EDAN Acclarix AX4 User Manual page 60

Acclarix AX4 Diagnostic Ultrasound System User Manual
In figure 5-5, the first image shows the basis slice, other images are orthogonal to the basis slice and
parallel to each other. Lines on the basis slice indicate the locations of the parallel slices. If there are
more slices than images then the un-displayed slices are shown with a dotted line. A number below
each parallel slice shows the slice location in the basis slice, with 0 being the middle slice.
Control Name
A/B/C
3*3, 2*2, 3*2
Pan
Reset
Number
Figure 5-5 Multi-slice Imaging Mode
Description
These three radio buttons determine which slice is the required
parallel slice. These three choices are the same as on the
Volume display in quad mode.
These three radio buttons determine the layout of the display.
Pan the basis slice along the x-axis or y-axis of the activated
window. Use the trackpad to pan the basis slice along the x-axis
or y-axis. Parallel slices change with the pan operation.
Reset the operation of pan, rotate and zoom to the initial
condition.
Select how many slices to use
- 53 -
Imaging