EDAN Acclarix AX4 User Manual page 120

Acclarix AX4 Diagnostic Ultrasound System User Manual
Item
Store1/Store2/
Alt Store
Compression
Duration
Target Frame Rate
Report Printer
Options
Store Image
Store Clip
SONY-UP-D25MD,
SONY-UP-D898MD_X898MD
Store 3D data set
Store 4D data set
Lossless/Low/Medium/High
≤10 seconds
5/10/15/20/25 Hz
Printers
Add
Test
Clear
Table 9-3 Store/Print Set-up Description
Description
Store static image to internal hard disk
Store clip to internal hard disk
Connect the corresponding printer to print the
current image.
Store 3D data set to internal hard disk in 3D
mode. This option is only displayed when any
one of Store 1, Store 2 and Alt Store keys is
configured to store image.
Store 4D data set to internal hard disk in 4D
mode. This option is only displayed when any
one of Store 1, Store 2 and Alt Store keys is
configured to store clip.
Set the image compression type
Set the clip capture duration
Set the clip capture frame rate
List up to six printer models that have been
added to this system recently. If one of the six
printers is connected to the system again, you
can print directly.
Add a new printer to this system, and its
printer model will be shown in printers list.
Test whether
successfully.
Clear all the printer settings.
- 113 -
the printer is connected
Utilities