Acclarix AX4 Diagnostic Ultrasound System User Manual
3D
4D
Start
Exit
5.8.2. 3D Volume Sweeping
Select Skeleton or Surface on the Pre-3D touch screen and press Start button or Enter key to
start image acquisition.
During the process of 3D volume sweeping, the images swept in VOI box are displayed in the
image area.
While scanning, the sector
control panel and touch screen can be activated.
5.8.3. 3D Image Review
The system will enter to the 3D review status after finishing one sweep.
Displayed in Pre-4D. Press to switch to Pre-3D.
Displayed in Pre-3D. Press to switch to Pre-4D.
Start an acquisition.
Exit 3D/4D
Table 5-7 Pre-3D Touch Screen
Figure 5-3 3D Image Scanning
in the right bottom is filled gradually, and no buttons on the
- 49 -
Imaging