EDAN Acclarix AX4 User Manual page 21

Acclarix AX4 Diagnostic Ultrasound System User Manual
5 Hinge
6 Transducer locking lever
7 Transducer Port
8 TrackPad
9 Battery Indicator
10 I/O Ports
I/O Ports on the left panel:
1. Power supply
2. S-Video output port
3. Display port
4. USB 3.0 port
：
NOTE If an external monitor is connected to the system via display port, configure the
resolution to 1920x1080, other resolution may cause abnormal ultrasound machine
display.
Used to rotate the monitor
Use to lock or unlock the transducer
Used for connecting a transducer to the system main
unit
Use to change the cursor position
LEDs indicate battery charge. Each LED corresponds
to 20% of battery power. The LEDs will flicker while
the battery is charging. Touch the battery indicator to
view the battery power.
Use to connect the I/O extend modules
Table 3-3 Appearance of the System
Figure 3-2 I/O ports of the system
Table 3-4 I/O Ports of the System
- 14 -
1
2
3
4
5
6
7
8
5. USB 2.0 port
6. Network port
7. Microphone input port
8. Audio output port
Getting Started