automatically disconnected. Idle Timeout is the period of
time when there is no data traffic between the dial-in user or
Remote Node and the router. This field will only be used if
Recv. Authen is set to None and the call is not mapped to any
Remote Node or Remote Dial-in User, or the router calls
back to the Remote Dial-in User.
Once you have completed filling in Menu 13—Default Dial-in
Setup, press ENTER at the message 'Press ENTER to Confirm...'
to save your selections, or press ESC at any time to cancel your
selections.
Dial-In Users Setup
The following steps describe the setup procedure for adding a
Remote Dial-in User. From the Main Menu, enter 14 to go to 14.
Dial-in User Setup is shown below:
66
Dial-In Configuration