10. Ping Host—This diagnostic test pings the host which
determines the functionality of the TCP/IP protocol on your
system.
11. Reboot System—This option reboots the system. This serves
to implement any changes that may have been recently added to
your system.
12. Command Interpreter Mode—This option allows the user to
enter command interpreter mode. This mode allows you to
diagnose and test your DI-300 or DI-300M using a specified set
of commands.
Backup Configuration
Selecting option 5 from Menu 24—Maintenance will allow you to
backup your current DI-300 or DI-300M configuration onto disk.
Backup is highly recommended once your configuration is
functioning.
You need to download the configuration onto disk. The procedure
for downloading varies depending on the type of software used to
access the router, but you must use the XMODEM protocol to
perform the download.
Restore Configuration
Selecting option 6 from Menu 24—Maintenance will restore a
backup configuration from disk to the DI-300 or DI-300M. You
need to upload a backup file to the router. The procedure for
uploading varies depending on the type of software used to access
132
System Maintenance