1. Switch Type—This field is fixed as DSS1 or 1TR6.
2. B Channel Usage—This field is fixed as Switch/Switch.
3. ISDN Data & Subaddress—Enter the telephone number
and subaddress assigned to the ISDN data call for the router.
It will be used as the outgoing CGPN(Calling Party Number)
setting for ISDN data calls. Note that the router only accepts
digits; do not include—and spaces in this field. This field
should be no longer than 19 digits for the number and 5 digits
for the Subaddress. The Subaddress is only available for
DSS1.
4. Dial Prefix to Access Outside Line—Enter the prefix
number if the router is connected to an ISDN PBX. This
number will be added to all outgoing calls and should be no
longer than 3 digits. Otherwise, leave this field blank.
5. PBX Number (with S/T Bus Number)—Enter the S/T bus
number if the router is connected to an ISDN PBX. If this
field is left as blank then the loopback test will be skipped.
32
Installation