System Management Terminal Interface Summary - D-Link DI-300 series User Manual

The SMT main menu is shown below:

System Management Terminal Interface Summary

This section summarizes all major SMT Menus:
# Menu Title
1 General Setup
2 ISDN Setup
3 Ethernet Setup
4 Internet Access Setup
11 Remote Node Setup
12 Static Routing Setup
13 Default Dial-in Setup
14 Dial-in User Setup
21 Filter Set Configuration
22 SNMP Configuration
Installation
Description
Set up general information and enable routing or bridging
of specific protocols
Set up ISDN configuration
Set up Ethernet configuration
A quick and easy way to setup Internet connection
Set up Remote Node for LAN-to-LAN connection
including Internet connection. A DI-300 or DI-300M can
have up to four Remote Nodes.
Set up static routes for different protocols. Up to four static
routes can be set for each protocol.
Set up default dial-in parameters such that your DI-300 or
DI-300M can be a dial-in server for the Remote Node and
Remote Dial-in User.
Set up Remote Dial-in User. Your DI-300 or DI-300M
can directly support up to eight Remote Dial-in Users.
Set up filters to be used in Menu 3 and Menu 11 to provide
security, call control, etc.
Set up SNMP-related parameters (DI-300M only)
27