1. Rem IP Address—This will show the IP address you entered
for this Remote Node in the previous menu.
2. Rem IP Subnet Mask—Enter the subnet mask for the
remote network.
3. My WAN Addr—Some implementations, especially the
UNIX derivatives, require hosts on both ends of the ISDN
link to have separate addresses from the LAN, and that the
addresses must have the same network number. If this is the
case, enter the IP address assigned to the WAN port of your
DI-300 or DI-300M. Note that this is the address assigned to
the local DI-300 or DI-300M, not the remote router.
TCP/IP Configuration
73