Table of Contents
Advertisement
Adding Users to the RADIUS Database
The DI-300M only uses the RADIUS database for user
authentication; except for Password, Dialback-No, and the
D-Link extensions D-Link-Callback-Option and D-Link-
Callback-Phone-Source (described below), most standard
RADIUS attribute fields are ignored by the DI-300M.
To add a user to the RADIUS database, edit the users file in the
RADIUS server's /etc/raddb directory, and add a line similar
to the following:
joeuser
Each user should have a user name/password record in the users
database.
Using RADIUS Authentication for CLID
To use RADIUS for CLID authentication, create a user record in
the users file , where the user name (the first field) is the
telephone number, and the password (the second field) is always
D-Link-CLID (case-sensitive). The regular user name is put in a
User-Name field. The following is an example of a CLID user
record:
5551212
118
Password = "joepassword"
Password = "D-Link-CLID"
User-Name = "joeuser",
D-Link-Callback-Option = Mandatory,
D-Link-Callback-Phone-Source = Preconfigured
Dialback-No = "5551212"
System Security
Advertisement
Table of Contents
