Table of Contents
Advertisement
1. Single User Account—This field should be set to yes to
enable the Single User Account (Network Address
Translator) feature for this site. Use the space bar to toggle
between yes and no. See page 43 for more information on the
Single User Account feature.
2. Server IP address—If you are using the Single User
Account feature and you want to make a server accessible on
your LAN, e.g., a web server, accessible to outside users,
enter that servers IP address here.
3. Metric—The metric represents the "cost" of transmission for
routing purpose. IP routing uses hop count as the
measurement of cost, with a minimum of 1 for directly
connected networks. Enter a number that approximates the
cost for this link. The number need not be precise, but it must
be between 1 and 16. In practice, 2 or 3 is usually a good
number.
4. Private—This parameter determines if your DI-300 or
DI-300M will include the route to this Remote Node in its
RIP broadcasts. If set to yes, this route is kept private and
not included in RIP broadcasts. If no, the route to this
74
TCP/IP Configuration
Advertisement
Table of Contents
