selections. This data will now be displayed on Menu 21.1—Filter
Rules Summary.
Generic Filter Rule
This section will show you how to configure the protocol-
independent parameters for a Generic filter rule for your DI-300 or
DI-300M. For information on the protocol-dependent fields, refer
to the previous section, TCP/IP Filter Rule and the following
section, Novell IPX Filter Rule. The fields in the menu are indicated
in bold type.
1. Offset—Offset refers to the value of the byte that you want
to use as your starting offset. That is, in the data packet, at
what point do you want to begin the comparison. The range
for this field is from 0 to 255. Default = 0
2. Length—This field refers to the length (in bytes) of the data
in the packet that the router should use for comparison and
Filter Configuration
105