Section 2 - Installation
Note: Power off your network devices, including your existing connection box/modem and PC.
Position your DSL-226 near your PC and a telephone wall jack that provides DSL service. Keep the router in an open
1
area for better wireless coverage.
Use the DSL-226 as both a modem and router. Plug one end of the supplied
2-1
the back of the router and the other end into the telephone wall jack with the supplied microfilter installed in between.
a.
Connect the supplied microfilter to your telephone wall jack with the
cable labelled WALL SOCKET.
WALL JACK
D-Link DSL-226 User Manual
Manual Setup
WALL JACK
DSL-226
PC
DSL phone cable
b.
Connect the supplied phone cable from the MODEM port on the
microfilter to the DSL port of the router.
into the DSL port on
Microfilter
11