Table of Contents
Advertisement
Handle IPX—Set this parameter to None if there is no IPX
traffic on the LAN or if you do not want to apply any special
handling for IPX. Set it to Client if there are only client
workstations on the LAN. Set to Server if there are only IPX
servers on the LAN.
If there are both clients and servers on the LAN, then the setting
depends on if the local clients will access the remote servers. If
they do, set to Client and set Dial-On-Broadcast in menu 11.2
to Yes to allow the client queries to trigger the call. If they do
not, set it to Server.
When you are finished, press ENTER at the message 'Press
ENTER to Confirm...' to save your selections, or press ESC at any
time to cancel them.
Bridging Configuration
91
Advertisement
Table of Contents
