Table of Contents
Advertisement
1. Single User Account—Enter Yes to enable the Single User
Account feature. Use the space bar to toggle between Yes
and No.
2. Single User Account: IP Addr—If your ISP assigns you a
dynamic IP address, enter 0.0.0.0 here. If your ISP assigns
you a static IP address enter that IP address here.
3. Single User Account: Server IP Addr—If you want to
make a single server, e.g., a Web server, accessible to outside
users, enter that server's IP address here.
Press ENTER at the message 'Press ENTER to Confirm...' to
confirm your selections or press ESC at any time to cancel your
selections.
At this point, the router will ask if you wish to test the Internet
connection. If you select Yes, the router will call the ISP to test
the Internet connection. If the test fails, note the error message
that you receive and take the appropriate troubleshooting steps.
Configuring Backup ISP Accounts
Sometimes it may be desirable to configure more than one ISP
account for backup purposes. The Single User Account feature can
be enabled for all of these accounts, making it convenient to switch
Internet Service Providers in the event of a failure.
To configure a backup ISP,
1. Configure your primary ISP using Menu 4, as described
earlier in this chapter.
46
Configuring for Internet Access
Advertisement
Table of Contents
