SPACE bar) under the Filter Type field and press ENTER. This
will bring you to the corresponding menu.
TCP/IP Filter Rule
This section will show you how to configure a TCP/IP filter rule
for your outer. The fields in the menu are indicated in bold type.
1. Active—In this field, you can make the filter rule active or
inactive. There are two options:
2. IP Protocol—Protocol refers to the IP specific number of the
protocol. The range for this value should be between 0 and
255. For example, 6 refers to the TCP protocol.
3. IP Source Route—Determine, Yes or No, whether to check
the source route.
Filter Configuration
Yes.
No.
101