Call Control Setup; Ppp/Mp Dial-Out Setup - D-Link DI-304 User Manual

Hide thumbs Also See for DI-304:

Table of Contents

DI-304/DI-304M ISDN Remote Router

home network to retrieve the files. Of course, you have to have a fixed IP address and

expose some internal network resources, such as FTP, WWW etc.

Click Call Control and PPP/MP Setup and specify a phone number in the Remote

Activation field.

Call Control Setup

Dial Retry and Dial Delay Interval

These two parameters set global settings for ISDN dialup access.

Remote Activation

If the router accepts a call from the number 12345678, it will disconnect immediately and

dial to the ISP. Note that Internet Access Setup → Dialing to a Single ISP should be

preset properly.

Basic Setup

♦

Dial Retry – Specify the dial retry counts per triggered packet. A triggered

packet is any packet whose destination is outside the local network. The

default setting is no dial retry. If set to 5, for each triggered packet, the router

will dial 5 times until it is connected to the ISP or remote access router.

♦

Dial Delay Interval – Specify the interval between dialup retries. By default,

the interval is 0 seconds.

Table of Contents