Table of Contents
Advertisement
router. This field will only be used if Recv. Authen is set to
None and the call is not mapped to any Remote Node or
Remote Dial-in User, or the router calls back to the Remote
Dial-in User.
Once you are finished filling in menu 13, Default Dial-in Setup,
press ENTER at the message 'Press ENTER to Confirm...' to save
your selections, or press ESC at any time to cancel your selections.
Dial-In Users Setup
The following steps describe the setup procedure for adding a
Remote Dial-in User. From the main menu, enter 14 to go to menu
14, Dial-in User Setup. This menu is shown below:
Select one of the eight possible users by number. This will bring
you to the next screen, menu 14.1, Edit Dial-in User.
Dial-In Configuration
75
Advertisement
Table of Contents
