Table of Contents
Advertisement
the call and dialing the specified callback number (see below).
The default setting of this control is No.
5. Phone # Supplied by Caller—This control allows the
Remote Dial-in User to specify the callback telephone
number on a call-by-call basis. This is useful for when the DI-
300 or DI-300M returns a callback to a mobile user at
different numbers, e.g., a sales rep in a hotel. Note that the
default is No, i.e., the router always calls back to the fixed
callback number.
6. Callback Phone #—If Callback is Yes, then this is a required
field. Otherwise, N/A will appear in the field. Enter the
telephone number to which the router will call back.
7. Rem CLID—If you have enabled the CLID Authen field in
Menu 13, you need to specify the telephone number from
which this Remote Dial-in User calls. The DI-300 or
DI-300M will check this number against the CLID in the
incoming call. If they do not match and the CLID Authen is
Required, the router will reject the call.
8. Idle Time-out—Enter the idle time (in seconds). This time-
out determines how long the dial-in user can be idle before
the DI-300 or DI-300M disconnects the call. Idle time is
defined as the period of time where there is no data traffic
between the dial-in user and the router. The default is 300
seconds (5 minutes).
More on CLID
CLID allows your DI-300 or DI-300M to authenticate the caller
before a call is answered, thus saving the cost of a connection. The
68
Dial-In Configuration
Advertisement
Table of Contents
