Table of Contents
Advertisement
General Ethernet Setup
This menu determines the type of Ethernet interface you are using
as well as the filter sets you wish to implement to monitor your
Ethernet traffic. From Menu 3—Ethernet Setup, enter 1 to go to
menu 3.1 -General Ethernet Setup.
Input and Output Filter Sets—Filter sets are used to block
certain packets to reduce traffic and to prevent a security breach.
Filtering is a very involved subject, so leave these fields blank for
the time being. After you have studied the Filter Configuration
chapter starting on page 96, come back and define the filter sets.
TCP/IP Ethernet Setup and DHCP
If you are setting up your network for the first time, read the
Configuring for Internet Access chapter before proceeding. The
chapter contains important information on how to assign IP
addresses for your network.
34
Installation
Advertisement
Table of Contents
