Novell Ipx Filter Rule - D-Link DI-300 series User Manual

Once you have completed filling in Menu 21.1.1—Generic Filter
Rule, press ENTER at the message 'Press ENTER to Confirm...'
to confirm your selections, or press ESC at any time to cancel your
selections. This data will now be displayed on Menu 21.1—Filter
Rules Summary.

Novell IPX Filter Rule

This section will show you how to configure the protocol-
dependent parameters for an IPX filter. The fields in the menu are
displayed in bold type.
1. IPX Packet Type—Enter the IPX packet type value of the
packet you wish to filter. This setting should be a one-byte
value, expressed in hexadecimal..
2. Destination/Source Network #—Enter the four hex-byte
destination/source network numbers of the packet that you
wish to filter.
Filter Configuration 107