Configuration For Single User Account - D-Link DI-300 series User Manual

IP address MUST be selected from the list of IP addresses for
private networks as defined by the IANA.

Configuration for Single User Account

The steps for configuring your DI-300 or DI-300M for Single User
Internet Access are identical to conventional Internet Access, with
the exception that you need to fill in three extra fields.
Note that enabling the Single User Account feature will
automatically create a new entry in the Remote Node Setup menu
(menu 11). Before enabling the Single User Account feature, check
the Remote Node Setup menu to make sure there is space for a
new entry (there must be no more than three entries before you
enable the Single User Account feature).
Follow steps 1-4 from the previous section, Internet Access
Configuration.
Configuring for Internet Access 45