Internet Access Configuration - D-Link DI-300 series User Manual

NOTE: Regardless of your particular situation, do not create an
arbitrary IP address; always follow the guidelines above. For
more information on address assignment, refer to RFC 1597,
Address Allocation for Private Internets and RFC 1466,
Guidelines for Management of IP Address Space .
Once you have determined the IP address range for your local
network, you may want to use DHCP (Dynamic Host
Configuration Protocol) to assign addresses to individual hosts on
the network, as an alternative to manually configuring each host's
IP settings. See the TCP/IP Ethernet Setup and DHCP section on
page 34 for more information about DHCP.

Internet Access Configuration

The following steps describe the set-up procedure to configure
your DI-300 or DI-300M for Internet access. The information you
will need to provide will be indicated in bold type.
40 Configuring for Internet Access