Table of Contents
Advertisement
19. Telco Options: Period (hr)—This field will set the time
interval to reset the above outgoing call budget control.
20. Session Option: Input Filter Sets, Output Filter Sets and
Call Filter Sets—In these fields, select which filter set(s) you
would like to implement to filter the incoming and outgoing
traffic between this Remote Node and the router. You can
choose from 12 different filter sets. In addition, you can link
up to 4 filter sets together for further customization (e.g., 1,
5, 9, 12). Note that spaces and commas are accepted in this
field.
For more information on customizing your filter sets, see the
Filter Configuration chapter starting on page 96. The default is
blank, i.e., no filters defined.
21. Session Option: Idle Timeout (sec)—This value specifies
the number of idle seconds that elapses before the Remote
Node is automatically disconnected. Idle seconds is the
period of time where no data is passed between the Remote
Node and your DI-300 or DI-300M. Administrative packets
such as RIP are not counted as data. The default is 300
seconds (5 minutes).
Once you have completed filling in Menu 11.1—Remote Node
Profile, press ENTER at the message 'Press ENTER to Confirm...'
to confirm your selections, or press ESC at any time to cancel your
selections.
Bandwidth on Demand
The Bandwidth on Demand (BOD) feature allows you to bundle
both B channels in one connection. The second channel is added
54
Remote Node Configuration
Advertisement
Table of Contents
