Di-300'S Filter Structure; Configuring A Filter Set - D-Link DI-300 series User Manual

For incoming packets, your DI-300 or DI-300M applies data filters
only. Packets are processed depending upon whether a match is
made. The router allows you to customize the filter sets that you
wish to use. This following sections describe how to configure the
router's filter sets.

DI-300's Filter Structure

You can configure up to twelve filter sets with six rules in each set.
Therefore, your DI-300 or DI-300Mallows you to customize up to
72 filter rules (12
When implementing these filter sets, you can link up to four of the
filter sets together to screen the data packet. Therefore, with each
filter set having up to six rules, you can have a maximum of 24
rules active for a single filtering application.

Configuring a Filter Set

In order to distinguish between the 12 filter sets, each filter set
should have a name or some comments. You can edit these
comments in the following way.
1. From the Main Menu, select option 21. This will take you to
Menu 21—Filter Set Configuration.
2. This menu lets you choose from twelve filter sets. Select the
filter set you wish to configure (1-12).
This will take you to the Edit Comments field. You can edit the
comments you wish to use to identify that filter set. The comments
for any given filter set can contain up to 15 characters.
Filter Configuration
6).
97