Basic Configuration And Internet Access; Changing The Administrator Password; Configuring Ethernet Tcp/Ip Address And Dhcp Server - D-Link DI-304 User Manual

Isdn/dsl

Hide thumbs Also See for DI-304:

Table of Contents

DI-304ISDN Remote Router

Basic Configuration and Internet Access

Basic Setup (Setup First)

This group includes Administrator Password Setup, Ethernet TCP/IP and

DHCP Setup, and ISDN Setup.

On first setup the router requires no password. However, for security reasons, we

strongly recommend that you set an administrator password for the router. If you do

not set a password for the router, any user can access the setting of the router and

make changes randomly from local network or the Internet.

Click Administrator Password Setup, the following screen will open.

The Router has four Ethernet ports for connecting to the local Ethernet network and

external broadband device (i.e. DSL modem/router or Cable modem). There are two

sets of IP address settings for the Ethernet. The first IP address/net mask is for

private users or NAT users, and the second IP address/subnet mask is for public

users or pure router (not NAT) user. To allow access of public users you need to

subscribe a globally reachable subnet from your ISP.

For example, for some ISDN dial-up access, the ISP will assign a few public IP

addresses for your local network usage. You could use one IP address for your

router; the second IP address/subnet mask should be configured using the public IP

♦

Old Password – If this is the first time you enter this menu, leave this

field blank.

♦

New Password – Enter an administrator password.

♦

Retype New Password – Type the password again to confirm.

Table of Contents