Basic Configuration And Internet Access; Basic Setup; Changing The Administrator Password; Configuring Ethernet Tcp/Ip Address And Dhcp Server - D-Link DI-304 User Manual

DI-304/DI-304M ISDN Remote Router

Basic Configuration and Internet Access

Basic Setup (Setup First)
This group includes Administrator Password Setup, Ethernet TCP/IP and
DHCP Setup, and ISDN Setup.

Changing the Administrator Password

On first setup the router requires no password. However, for security reasons, we
strongly recommend that you set an administrator password for the router. If you do
not set a password for the router, any user can access the setting of the router and
make changes randomly from local network or the Internet.
Click Administrator Password Setup, the following screen will open.

Configuring Ethernet TCP/IP Address and DHCP Server

The Router has four Ethernet ports for connecting to the local Ethernet network and
external broadband device (i.e. DSL modem/router or Cable modem). There are two
sets of IP address settings for the Ethernet. The first IP address/netmask is for
private users or NAT users, and the second IP address/netmask is for public users or
pure router (not NAT) user. To allow access of public users you need to subscribe a
globally reachable subnet from your ISP.
♦
Old Password – If this is the first time you enter this menu, leave this
field blank.
♦
New Password – Enter an administrator password.
♦
Retype New Password – Type the password again to confirm.
26