FUEL SYSTEM
3.3.2.
DISASSEMBLING THE THROTTLE BODY
•
Unscrew and remove the M8x1 nut (1) and remove the
spring washer.
•
Turn the throttle valve control lever (2) slightly, un-
screw and remove three T.E. M5x12 screws (3).
•
Slip the whole support bracket (4) securing the throttle
cables, with the two bushes (5) and the torsion spring
(6), off the throttle body.
•
Loosen and remove the two M6x16 screws (7) and re-
move the fuel pressure regulator (8) complete with O-
ring.
•
Loosen and remove the three M6x25 screws (9) and
remove the left injector support (10) - together with the
relevant gasket (11), injector (12) and sealing ring (13)
- from the throttle body.
3 - 20
RSV 1000 R - RSV 1000 R FACTORY