Power supply
Injection
Checking the injector
•
Controllare il cablaggio elettrico e i collegamenti.
•
Mediante lo strumento di diagnosi nella sezione AUTODIAGNOSI / ATTIVAZIONI / ATTI-
VAZIONE INIETTORE, è possibile effettuare l'attivazione degli iniettori e verificare quindi il
corretto funzionamento.
Removing the throttle body
•
Completely remove the air filter box.
•
Disconnect the injector fuel pipe.
•
Release the snap fit clamp on the col-
lars from the engine.
NOTE
DO NOT RELEASE THE CLAMPS COMPLETELY. LEAVE
IN AN INTERMEDIATE POSITION TO FACILITATE REFIT-
TING.
•
Disconnect the lower injector connec-
tors.
•
Disconnect the connector.
•
Remove the complete throttle body.
See also
Air box
P SUPP - 226
Tuono V4 1100 Factory