Yealink MeetingEye 600 Administrator's Manual page 162

2. Configure and save the following settings:
Parameter
Default Layout of
Single Screen(it is
only applicable to
second generation
VCS devices and
VP59)
Not in Content
Sharing (only
applicable to third
generation VCS
devices)
Description
Configure the default layout of a single
screen when a call is established.
• Remote big Local small—the remote
video image is displayed in the large
window and the local video image is
displayed in the small window at the
screen bottom.
Remote Full screen—the remote video
•
image is displayed in full screen.
Equal NxN—the remote and the local
•
video images are displayed in the same
size.
• Picture in Picture—the remote video
image is displayed in a large window,
and the local video image is reduced to
a thumbnail in the bottom-right corner of
the large window. (it is not applicable to
VP59)
Default: Picture-in-picture. For VP59, the
default one is Remote big Local small.
Configure the default layout of a single
screen when a call is established and has no
content sharing.
• 1+N—the selected video image is
displayed in the large window and other
video images are displayed in small
windows.
• Selected Speaker—the selected video
image is displayed in full screen.
Equal NxN—the remote and the local
•
video images are displayed in the same
size.
• Picture in Picture—the remote video
image is displayed in a large window,
and the local video image is reduced to a
thumbnail in the bottom-right corner of the
large window.
Default: Picture-in-picture.
| Configuring Video Settings | 162
Configuration Method
Web user interface
Web user interface