https://arttel.ru/
User Guide for the VC800 Video Conferencing System
Note
Audio Setting
Audio Output Device
86
https://arttel.ru/shop/videokonferentsii/yealink-vc800-cp960-8way
If Auto is selected, the system will select the appropriate bandwidth automatically.
Press
or
to select Save and then press
8.
The priority of bandwidth is as follows:
System bandwidth > Contact bandwidth (refer to
For example: the system bandwidth is 512kbps, if contact bandwidth is set to a value greater than
512bps, then the actual contact bandwidth will be 512bps. If contact bandwidth is set to a value
less than 512bps, then the actual contact bandwidth will be the value set by user.
Bandwidth is configurable via web user interface at the path Setting->Call Features->Uplink
Bandwidth/Downlink Bandwidth.
The system supports the following audio devices:
Auto (audio output device with the highest priority is selected automatically)
VCS Phone (CP960 Conference phone)
HDMI (built-in speakerphone of the display device)
Line Output (speakerphone connected to the Line Out port on the VC800 codec)
to accept the change.
Adding
Contacts).