Yealink MeetingEye 600 Administrator's Manual page 238

Procedure
1. Do one of the following:
• On your web user interface, go to Account > Video Conference Platform > Platform Type >
Zoom/Pexip/BlueJeans/Videxio/Custom.
• On your web user interface, go to Account > SIP Account/SIP IP Call.
• On your VCS, go to More > Settings > Advanced > Account > SIP Account/SIP IP Call.
> Settings > Advanced > Account > SIP Account/SIP IP Call.
For VP59, tap
•
On your CTP20/CTP18, tap
2. Configure and save the following settings:
Parameter
Transport
> Settings > Advanced > Account > SIP Account/SIP IP Call.
Description
Specify the transport protocol for
SIP signaling.
The supported protocols are as
follows:
UDP—it provides the
•
best transmission for SIP
signaling.
• TCP—it provides a reliable
transmission for SIP
signaling.
• TLS—it provides a safe
transmission for SIP
signaling. TLS is available
only when the device is
registered on a SIP server
that supports TLS.
DNS-NAPTR—the device
•
performs the DNS NAPTR
and SRV request to find the
service type and the port if no
server port is given.
Note:
• Yealink Cloud Platform and
StarLeaf Cloud platform
cannot be configured.
• The default value of the
Zoom/Pexip/BlueJeans/
Videxio/Custom Cloud
platform/SIP IP call is TCP.
• The default value of
EasyMeet Cloud platform is
TLS.
• The default value of the SIP
account is UDP.
• If you use TLS, you need to
upload the CA certificate to
the server for the devices.
| Configuring the Security Features | 238
Configuration Method
Web user interface
Endpoint
CTP20/CTP18