Yealink MeetingEye 600 Administrator's Manual page 99

Parameter
Gatekeeper Mode/Gatekeeper
Type
Gatekeeper IP Address 1/
Gatekeeper Server2
Port/Gatekeeper Port 1
Gatekeeper IP Address 2/
Gatekeeper Server2
Port/Gatekeeper Port 2
Description
Configures the gatekeeper
mode.
Off—the system does not
•
use a gatekeeper.
Auto—the system
•
automatically discovers a
gatekeeper.
Manual—specify the IP
•
address and the port for the
gatekeeper manually. You
need manually configure the
IP address and the port for
the gatekeeper.
Default: Disabled.
Configure the IP address or the
domain name for the primary
gatekeeper.
Note: the default value is blank.
Only when the configuration
type is manual do you need to
configure this parameter.
Configure the port for the
primary gatekeeper.
Note: the default port number
is 1719. The value can be any
integer from 0 to 65535.
Configure the IP address or the
domain name for the secondary
gatekeeper.
Note: the default value is blank.
Only when the configuration
type is manual do you need to
configure this parameter.
If the device cannot access the
primary gatekeeper, the device
will send the registration request
to Gatekeeper Server2.
Configure the port for the
secondary gatekeeper.
Note: the default port number
is 1719. The value can be any
integer from 0 to 65535.
| Configuring Account Settings | 99
Configuration Method
Web user interface
Endpoint
CTP20/CTP18
Web user interface
Endpoint
CTP20/CTP18
Web user interface
Endpoint
CTP20/CTP18
Web user interface
Endpoint
CTP20/CTP18
Web user interface
Endpoint
CTP20/CTP18