Yealink MeetingEye 600 Administrator's Manual page 100

Parameter
Gatekeeper Authentication/
Gatekeeper Verify
Gatekeeper Username
Gatekeeper Password
Protocol Monitor Port
Description
Enable or disable support for the
gatekeeper authentication.
Note: the default value
is Off. When Gatekeeper
Authentication is enabled, the
gatekeeper can ensure that
only the trusted H.323 devices
are allowed to access the
gatekeeper.
Configure the username used for
the gatekeeper authentication.
Note: the default value is blank.
Configure the password for the
gatekeeper authentication.
Note: the default value is blank.
Configure the port of the H.323
call signaling.
If you fail to place an IP call to
other party via H.323 protocol,
it may be caused by the ISP
limiting the 1720 port, so you
need modify the protocol monitor
port, and call the far site by
dialing h323:ip:port.
Note: the default value is 1720.
The modification on this port is
only applicable for the H.323 IP
call.
| Configuring Account Settings | 100
Configuration Method
Web user interface
Endpoint
CTP20/CTP18
Web user interface
Endpoint
CTP20/CTP18
Web user interface
Endpoint
CTP20/CTP18
Web user interface