Yealink MeetingEye 600 Administrator's Manual page 108

Parameter
Server Host/Server
Port
Remember password
Transport
Server Expires
Description
The IP address or domain name
of the Pexip server.
Note: the default value is blank.
The port of the Pexip server.
Default: 0.
Enable or disable remembering
password.
Note: the default value is Off.
If it is set to On, the password
will be filled in automatically
when you enter the username
next time.
Specify the transport protocol for
transmitting the SIP signaling.
The supported protocols are as
follows:
UDP—it provides the
•
best transmission for SIP
signaling.
• TCP—it provides a reliable
transmission for SIP
signaling.
TLS—it provides a safe
•
transmission for SIP
signaling. TLS is available
only when the device is
registered on a SIP server
that supports TLS.
DNS-NAPTR—the device
•
performs the DNS NAPTR
and SRV request to find the
service type and the port if no
server port is given.
Default: TCP.
The registration timeout (in
seconds) of the device.
After the timeout, the device will
send the registration request to
the server again.
Default: 3600 seconds.
| Configuring Account Settings | 108
Configuration Method
Web user interface
Endpoint
CTP20/CTP18
Web user interface
Endpoint
CTP20/CTP18
Endpoint
CTP20/CTP18
Web user interface
Web user interface