Yealink MeetingEye 600 Administrator's Manual page 86

2. Configure and save the following settings:
Parameter
802.1x Mode
Identity
MD5 Password
CA Certificates
Device Certificates
Description
Specify the 802.1x
authentication mode.
• Disabled
• EAP-MD5
• EAP-TLS
• PEAP-MSCHAPv2
• EAP-TTLS/EAP-MSCHAPv2
Note: the default value is
disabled.
If you change this parameter, the
system will reboot to make the
change take effect.
Configure the user name for
802.1x authentication.
Note: the default value is blank.
If you change this parameter, the
system will reboot to make the
change take effect.
Configure the password for
802.1x authentication.
Note: the default value is blank.
If you change this parameter, the
system will reboot to make the
change take effect.
Upload the CA certificates.
Note: upload the CA certificates
when the 802.1x authentication
mode is configured as EAP-TLS,
PEAP-MSCHAPv2, or EAP-
TTLS/EAP-MSCHAPv2.
If you change this parameter, the
system will reboot to make the
change take effect.
Upload the device certificates.
Note: Configure the access URL
of the server certificate when the
802.1x authentication mode is
configured as EAP-TLS.
If you change this parameter, the
system will reboot to make the
change take effect.
| Configuring Network Settings | 86
Configuration Method
Web user interface
Endpoint
CTP20/CTP18
Web user interface
Web user interface
Web user interface
Web user interface