Yealink MeetingEye 600 Administrator's Manual page 171

2. Configure and save the following settings:
Parameter
Output in IDLE
Description
Specify the content to be displayed
on the secondary monitor when the
system is idle.
Auto—The secondary monitor
•
displays the content in this
priority: PC>Active Camera>VCS
Camera>Camera N.
PC—The secondary monitor
•
displays the PC content.
Active Camera—The secondary
•
monitor displays the video images
from the currently active camera.
If you change the active camera,
the video image on the secondary
monitors also changes. For
example, if you use the VC880/
VC800/PVT980 camera as the
active camera first, and then
you select the preset of camera
1 (The Preset Synchronize
With Active Camera feature is
enabled, and the active camera
becomes camera 1 at this time),
the secondary monitor displays the
image of camera 1.
VCS Camera (it is not applicable
•
to VC880)—The secondary
monitor displays the video images
from the camera built-in VCS.
Camera N—The secondary
•
monitor displays the video images
from the connected camera N.
Note: the default value is Auto.
| Configuring Video Settings | 171
Configuration Method
Web user interface