Yealink MeetingEye 600 Administrator's Manual page 157

Video Codec
H.263+
H.265 (it is not
applicable to VP59)
APL-H.264-SVC(it
is only applicable to
Meeting Eye 600/
Meeting Eye 600/
PVT960/PVT940
running in Yealink
Cloud system)
Note:
1. H.265 video codec is only applicable to a one-way video call, and the VCS cannot be connected
to a third-party camera. The VCS will negotiate with other parties to use the H264 High profile
video codec automatically when more people join the call.
2. The APL-H.264-SVC feature is only available when the Yealink Cloud server supports H.264-
SVC and you use the Meeting Eye 600/Meeting Eye 600/PVT960/PVT940 running in Yealink
Cloud system. Before using the APL-H.264-SVC feature, contact Yealink to subscribe to the
H.264-SVC service.
Tip: H.263 video codec consumes twice as much bandwidth as H.264 High profile video codec and
four times as much as H.265 video codec.
Configuring Video Codec
Procedure
1. On your web user interface, go to Account > Codec > Video Codec.
2. Configure and save the following settings:
Parameter
Enabled
Disabled
SVC Enable (it is not applicable
to MeetingEye 600/MeetingEye
400/PVT960/PVT940/VC200/
VC200-E/VP59)
Bit Rate Frame
Rate
100—3000
kbps
Description
Configure the enabled video
codec for the system to use.
Note: You can move the
disabled codec to this field.
Configure the disabled video
codec.
Note: you can move the enabled
codec to this field.
This feature is only applicable to
H.264/H.264 video codec.
Default: Disabled.
| Configuring the Audio Settings | 157
Frame Size
Tx: CIF
Rx: CIF
Tx: 360P, 540P, 720P, 1080P
Rx: Conventional Size Below 1080P
Tx: 360P, 40P, 720P
Rx: Conventional Size Below 720P
Configuration Method
Web user interface
Web user interface
Web user interface