Yealink MeetingEye 600 Administrator's Manual page 74

• Connecting to a Hidden Wireless Network
When the system connects to a wireless network, the Wi-Fi icon
Fi icon indicates the signal strength. The more arcs you see, the stronger the signal strength is.
Note: If you connect the VCS devices to the wireless network via CTP20/CTP18, make sure that
CTP20/CTP18 is wired to the VCS devices.
• Connecting to the Wireless Network
• Connecting to a Hidden Wireless Network
Connecting to the Wireless Network
You can manually connect your phone to a wireless network.
Procedure
1. Do one of the following:
• On your VCS: go to More > Settings > Network Setting > Wi-Fi.
For VP59, tap > Settings > Network Setting > Wireless Network.
•
On , your CTP20/CTP18, tap
Wireless Network.
2. Enable Wi-Fi.
3. If you already enabled wireless AP, select OK to turn it off.
The system will automatically search for available wireless networks in your area.
4. Select the desired wireless network (SSID) and connect to it.
If the network is secure, enter its password in the Password field, and tap Join to Network.
Connecting to a Hidden Wireless Network
Some wireless networks do not broadcast their SSIDs, which makes them unavailable to find. In order to
connect to one of those networks, you need to connect to one of them manually.
Procedure
1. Do one of the following:
On your VCS: go to More > Settings > Network Setting > Wi-Fi.
•
For VP59, tap > Settings > Network Setting > Wireless Network.
•
On your CTP20/CTP18, tap
Wireless Network.
2. Enable Wi-Fi.
3. If you already enabled wireless AP, select OK to turn it off.
The system will automatically search for available wireless networks in your area.
4. Select Other.
5. Enter the name of the wireless network.
6. Select the desired value from the Security Mode drop-down menu.
7. Configure the corresponding parameters.
8. Select Join to Network.
> Settings > Network Setting > Host Network > Network >
> Settings > Network Setting > Host Network > Network >
| Configuring Network Settings | 74
will display on the status bar. The Wi-