Yealink MeetingEye 600 Administrator's Manual page 138

Parameter Description
Auto Recording
Enable or disable the system to start
recording automatically once a call is
established.
• On- the system starts recording
automatically once a call is established.
• Off- the system does not start recording
automatically once a call is established.
Note: the default value is Off. Only the
Recording feature is enabled can this feature
be available.
Stop Recording
Enable or disable the system to stop
When Call
recording automatically once a call is
Established
established.
On- the system stops recording
•
automatically once a call is established.
• Off- the system does not stop recording
automatically once a call is established.
Default: Disabled.
Stop Recording
Enable or disable the system to stop
When Call Ended
recording automatically once a call is ended.
On- the system stops recording
•
automatically once a call is ended.
Off- the system does not stop recording
•
automatically once a call is ended.
Default: On. It is not applicable to VP59.
Recording
Enable or disable the system to show
Notification
recording icon and recording prompt.
• On- the recording icon and the duration
are displayed on the system screen.
Off- the recording icon and the duration
•
are not displayed on the system screen.
Default: On.
WPP20 Recording
Enable or disable the system to allow the
Confirm action that you use WPP20 to record.
Default: On.
| Basic Settings | 138
Configuration Method
Web user interface
Web user interface
Web user interface
Web user interface
Web user interface