Joint Cover Assy - Brother DCP-9045CDN Service Manual

8.24 Joint Cover ASSY

(1) Remove the bind B M4x12 Taptite screw, and then remove the Pull arm guide L from the
Joint cover ASSY.
(2) Remove the bind B M4x12 Taptite screw, and then remove the Pull arm guide R from the
Joint cover ASSY.
(3) Disconnect the two Connectors (CN2, CN3) from the Main PCB ASSY. (CN2: MFC-
9840CDW only)
Side frame L
Main PCB ASSY
<Left side>
Pull arm guide L
Joint cover ASSY
Fig. 3-155
CN2
CN3
Fig. 3-156
3-121
Taptite, bind B M4X12
Confidential