Power Switch - Mitsubishi Outlander PHEV 2019 Manual

NOTE
l The heated mirror can be set so that it can
turn on automatically only once if the ambi-
ent temperature becomes low, when the op-
eration mode is put in ON.
For further information, we recommend you
to consult a MITSUBISHI MOTORS Au-
thorized Service Point. On vehicles equipped
with the Smartphone Link Display Audio or
the MITSUBISHI Multi-Communication
System (MMCS), screen operations can be
used to make the adjustment. Refer to the
separate owner's manual for details.

Power switch

E00631801617
In order to prevent theft, the Plug-in Hybrid
EV System will not start unless a preregis-
tered keyless operation key is used. (Immo-
bilizer function)
If you are carrying the keyless operation key,
you can start the Plug-in Hybrid EV System.
A
CAUTION
l The indication lamp (A) will flash orange
when there is a problem or malfunction in
the keyless operation system. Never drive if
the indication lamp on the power switch is
flashing orange. Immediately contact a
MITSUBISHI MOTORS Authorized Serv-
ice Point.
l If the power switch operation is not smooth
and feels like it is sticking, do not operate
the switch. Immediately contact
MITSUBISHI MOTORS Authorized Serv-
ice Point.
OGGE19E1
Power switch
NOTE
l When operating the power switch, press the
switch all the way in. If the switch is not
fully pressed, the Plug-in Hybrid EV System
may not start or the operation mode may not
change. If the power switch is pressed cor-
rectly, there is no need to hold the power
switch down.
l
When the battery in the keyless operation
key has worn out, or the keyless operation
key is out of the vehicle, a warning display
will appear.
Operation mode of the power
switch and its function
OFF
a The indication lamp on the power switch
turns off.
The operation mode cannot be put in OFF
unless the electrical parking switch is press-
ed.
Starting and driving
7
7-11