Engine Oil - Mitsubishi Outlander PHEV 2019 Manual

3. Make sure the bonnet is securely locked
by softly lifting the centre of the bonnet.
CAUTION
l Be careful that hands or fingers are not trap-
ped when closing the bonnet.
l Before driving, make sure that the bonnet is
securely locked. An incompletely locked
bonnet can suddenly open while driving.
This can be extremely dangerous.
NOTE
l If this does not close the bonnet, release it
from a slightly higher position.
l
Do not press down firmly on the bonnet as
doing so could damage it.
NOTE
l For vehicles equipped with the security
alarm system, if you drive with the bonnet
left open, a warning display is displayed on
the information screen in the multi informa-
tion display.

Engine oil

E01000405094
To check and refill engine oil
FULL LOW
OGGE19E1
Engine oil
The engine oil used has a significant effect on
the engine's performance, service life and
startability. Be sure to use oil of the recom-
mended quality and appropriate viscosity.
All engines consume a certain amount of oil
during normal operation. Therefore, it is im-
portant to check the oil level at regular inter-
vals or before starting a long trip.
1. Park the vehicle on a horizontal surface.
2. Switch off the engine.
3. Wait a few minutes.
4. Remove the dipstick and wipe it with a
clean cloth.
5. Reinsert the dipstick as far as it goes.
6. Remove the dipstick and read the oil lev-
el, which should always be within the
range indicated.
7. If the oil level is below the specified
limit, remove the cap located on the cyl-
inder head cover and add enough oil to
raise the level to within the specified
range. Do not overfill to avoid engine
damage. Be sure to use the specified en-
gine oil and do not mix various types of
oil.
8. After adding oil, close the cap securely.
9. Confirm the oil level by repeating step 4
to 6.
Maintenance
11
11-05