Quick Charging (Charging Method With Quick Charger) - Mitsubishi Outlander PHEV 2019 Manual

Drive battery warming system*
E08304600020
You cannot start the Plug-in Hybrid EV Sys-
tem and drive when the ambient temperature
is -30 °C or lower. (The warning display is
displayed on the information screen in the
multi-information display.) The drive battery
warming system will automatically operate
and the drive battery will be heated when you
connect the normal charge connector to the
normal charge port.
When the ambient temperature is higher than
-28 °C, you can start the Plug-in Hybrid EV
System and drive. The drive battery warming
system will automatically operate and the
drive battery will be heated when all the fol-
lowing conditions are met.
l The normal charge connector is connec-
ted to the normal charge port at an ambi-
ent temperature under -30 °C.
l The Plug-in Hybrid EV System is started
at an ambient temperature between
-29 °C and -10 °C.
The drive battery warming system will auto-
matically stop after the drive battery has been
heated until suitable temperature.

Quick charging (charging method with quick charger)

NOTE
l When the ambient temperature is very cold,
you cannot use the charging timer since the
drive battery warming system is operating.
And when the ambient temperature is -30 °C
or lower, you cannot use the function of the
remote climate control. When the ambient
temperature is higher than -29 °C after oper-
ating the drive battery warming system, you
can use the function of the remote climate
control.
Quick charging (charging
method with quick charger)
E08301401284
WARNING
l
Be sure to use the quick charger applica-
ble to CHAdeMO standard and certified
by CHAdeMO association. Use of the oth-
er quick charger may cause the fire or
malfunction.
l For operation of quick chargers, follow
the manual of each quick charger.
l If you use electro-medical apparatus such
as implantable cardiac pacemaker or im-
plantable cardioverter-defibrillator, be
careful the following precautions.
• Please do not use a quick charger.
• Keep away as much as possible from
the place where the quick charger is
stored. If you approach it carelessly,
leave quickly without standing still.
OGGE19E1
WARNING
• Please ask someone to perform the
quick charging if necessary.
l Before charging, make sure that there is
no foreign matter such as dust at the
quick charge port and the quick charge
connector.
At this time, do not touch the quick
charge port.
l When the quick charge connector is con-
nected to the quick charge port, prevent
foreign matter such as water or dust from
entering in the port.
Connection with foreign matter such as
water or dust may cause fire or an electric
shock. Do not perform charging if there
might be strong exposure to water at the
connection.
l During charging, the cooling fans inside
the bonnet room may automatically be
operated even if the operation mode of the
power switch is in OFF.
Keep your hands away from the cooling
fan during charging.
NOTE
l If the charge connector is not easily connec-
ted to the charge port due to foreign material
entering, never force the connection. Doing
so could damage the charging equipment or
the vehicle. Contact a MITSUBISHI
MOTORS Authorized Service Point.
Charging 3-17
3