Mitsubishi Outlander PHEV 2019 Manual page 157

Multi information display
NOTE
l While driving, the service reminder is not displayed even if you operate the multi information display switch. Always stop the vehicle in a safe place before
operating.
l While driving, the function setting screen is not displayed even if you operate the multi information display switch.
Before operation, park the vehicle in a safe place, firmly apply the parking brake, press the electrical parking switch, and shift to "P" (PARK) position.
Refer to "Changing the function settings" on page 6-17.
l When there is information to be announced, such as a system fault, the buzzer sounds and the screen display is switched.
Refer to "Interrupt display screen" on page 6-10.
6
Interrupt display screen
Warning display
When there is information to be announced,
such as a system fault, the buzzer sounds and
the information screen is switched to the
warning display screen.
Refer to the warning list and take the neces-
sary measures.
Refer to "Warning display list" on page
6-26.
When the cause of the warning display is
eliminated, the warning display goes out au-
tomatically.
6-10 Instruments and controls
To return to the screen dis-
played before the warning dis-
E00522002084
play
Even if the cause of the warning display is
not eliminated, you can return to the screen
that was displayed before the warning dis-
play.
If you press the multi information display
switch, the display screen switches to the
screen that was displayed before the warning
display and the mark (A) is displayed.
OGGE19E1
If you want to switch the dis-
play
Warning display screens with a " " or " "
mark displayed in the upper right of the
screen can be switched. If you want to switch
the display, press the multi information dis-
play switch as follows.
" ": Press lightly.
" ": Press for approximately 2 seconds or
more.
Redisplay of a warning display
screen
When the mark is displayed, if you lightly
press the multi information display switch a
few times, the warning display screen you
switched from is redisplayed.
Other interrupt displays
The operation status of each system is dis-
played on the information screen.