Mitsubishi Outlander PHEV 2019 Manual page 72

Symptom Possible cause
The charging indicator Quick charging has not finished
is continuously blink- normally.
ing even if the quick
charge connector is
not connected into the
quick charge port
when you start the
plug-in hybrid EV sys-
tem after quick charg-
ing.
Plug-in Hybrid EV The vehicle has a malfunction.
System does not start
after quick charging.
Possible solution
Perform quick charging again and finish it normally or contact a MITSUBISHI
MOTORS Authorized Service Point.
There is a possibility that the vehicle has a malfunction. After turning the operation
mode of the power switch to "ON" and putting the select position to "N", ask the
support of the fellow passenger or people nearby to move the vehicle by pushing it
into safety.
After moving, contact a MITSUBISHI MOTORS Authorized Service Point.
OGGE19E1
Charging troubleshooting guide
Charging 3-31
3