Catalytic Converter - Mitsubishi Outlander PHEV 2019 Manual

2019 mitsubishi outlander phev manual
Hide thumbs Also See for Outlander PHEV 2019:
Table of Contents

Advertisement

WARNING
l
If it is necessary to do work in the engine
compartment with the plug-in hybrid EV
system starting, be especially careful that
your clothing, hair, etc., does not become
caught by the cooling fans, drive belts, or
other moving parts.
l
After performing the maintenance, make
sure that no tools or cloths are left behind
in the engine compartment. If they are left
behind, a fire or damage to the vehicle
may occur.
l
The cooling fans can turn on automatical-
ly even if the plug-in hybrid EV system is
stopping. Put the operation mode of the
power switch in OFF to be safe while you
work in the engine compartment.
l
Make sure that the engine and Plug-in
Hybrid EV system has cooled down be-
fore removing the radiator cap and EV
cooling system reserve tank cap, because
hot steam or boiling water will otherwise
gush from the filler port and may scald
you.
l
Do not smoke, cause sparks or allow open
flames around fuel or auxiliary battery.
The fumes are flammable.
l
Be extremely cautious when working
around the auxiliary battery. It contains
poisonous and corrosive sulphuric acid.
l
Do not get under your vehicle with just
the body jack supporting it. Always use
automotive jack stands.
WARNING
l
Improper handling of components and
materials used in the vehicle can endanger
your personal safety. We recommend you
to consult a specialist for necessary infor-
mation.
l
The components inside the engine room
might be very hot to the touch.
To avoid being burnt, make sure all com-
ponents have sufficiently cooled before be-
ginning an inspection. These components
are affixed with the label indicating pre-
cautions for handling. Follow the instruc-
tions on the label.
1- Brake fluid reservoir (RHD)
2- Engine oil level dipstick
3- Engine oil cap
4- Brake fluid reservoir (LHD)
5- Washer fluid reservoir
6- EV cooling system reservoir
7- Engine coolant reservoir
OGGE19E1

Catalytic converter

Catalytic converter
E01000202495
The exhaust gas scavenging devices used
with the catalytic converter are extremely ef-
ficient for the reduction of noxious gases.
The catalytic converter is installed in the ex-
haust system.
It is important to keep the engine properly
tuned to ensure proper catalyst operation and
prevent possible catalyst damage.
WARNING
l
As with any vehicle, do not park or oper-
ate this vehicle in areas where combusti-
ble materials such as dry grass or leaves
can come in contact with a hot exhaust
since a fire could occur.
l
Paint should not be applied to the catalyt-
ic converter.
NOTE
l
Use fuel of the type recommended in "Fuel
selection" on page 2-14.
Maintenance
11
11-03

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents