Mitsubishi Outlander PHEV 2019 Manual page 285

Adaptive Cruise Control System (ACC)*
2- "SET -" switch
Used to set a desired speed and to reduce
the set speed.
3- "RES +" switch
Used to make ACC operate at the origi-
nally set speed and also to increase the
set speed.
4- "CANCEL" switch
Used to cancel the control function of
ACC or the cruise control.
5- ACC distance switch
7
Used to change the setting of the follow-
ing distance between your vehicle and a
vehicle in front.
NOTE
l Operate the individual switches correctly
and one after another.
The ACC may be turned off or its control
function may be cancelled if two or more
switches are pressed concurrently.
7-60 Starting and driving
Driving aid display
E00634901042
1- ACC indicator:
Indicate that the ACC is ON.
2- Control state indicator:
Indicate that the ACC is active.
3- Set speed:
Indicate the target speed.
4- Vehicles in front symbol:
Comes on when the radar detects a vehi-
cle ahead. Two types of indication;
"Stand by" and "Active"
State
Display
Stand by Active
Vehicle in
front detected
OGGE19E1
5- Following distance setting symbol:
Indicate the set following distance. Two
types of indication; "Stand by" and "Ac-
tive"
Following State
distance set-
Stand by Active
ting symbol
Long
Middle
Short