Mitsubishi Outlander PHEV 2019 Manual page 166

2. Lightly press the multi information dis-
play switch to select "AVG (average fuel
consumption)".
3. Press and hold the multi information dis-
play switch for about 2 seconds or more
to switch from A/1 (Auto reset mode) to
M/2/P (Manual reset mode), or from
M/2/P to A/1.
The setting is changed to the selected
mode condition.
Manual reset mode
l When the average fuel consumption is
being displayed, if you hold down the
multi-information meter switch, the
average fuel consumption displayed at
that time is reset.
l When the operation mode is changed
from ACC or OFF to ON, the mode set-
ting is automatically switched from man-
ual to auto.
Switching to auto occurs automatically.
If switching to manual mode is done,
however, the data from the last reset is
displayed.
Auto reset mode
l When the average fuel consumption is
being displayed, if you hold down the
multi-information meter switch, the
average fuel consumption displayed at
that time is reset.
l When the operation mode is in ACC or
OFF for about 4 hours or longer, the
average fuel consumption display is au-
tomatically reset.
NOTE
l The average fuel consumption display can
be reset separately for the auto reset mode
and for the manual reset mode.
l
The memory of the auto reset mode or man-
ual reset mode for the average fuel con-
sumption display is erased if the auxiliary
battery is disconnected.
OGGE19E1
Multi information display
Changing the fuel consumption
display unit
E00523001778
The display unit for fuel consumption can be
switched. The distance and amount units are
also switched to match the selected fuel con-
sumption unit.
1. Press and hold the multi information dis-
play switch for about 2 seconds or more
to switch from the setting mode screen
to the menu screen.
Refer to "Changing the function set-
tings" on page 6-17.
2. Lightly press the multi information dis-
play switch to select "AVG UNIT (fuel
consumption display setting)".
3. Press and hold the multi information dis-
play switch for about 2 seconds or more
to display "AVG UNIT".
Instruments and controls
6
6-19