Mitsubishi Outlander PHEV 2019 Manual page 26

2019 mitsubishi outlander phev manual
Hide thumbs Also See for Outlander PHEV 2019:
Table of Contents

Advertisement

The roles of the motors and en-
gine in each drive mode
Motor
Engine
EV Drive
Drives the
OFF
Mode
vehicle
Series Hybrid
Drives the
Generates
Mode
vehicle
electricity
Drives front
Parallel Hy-
Drives the
wheels and
brid Mode
vehicle
generates
electricity
Regenerative braking
Motion energy is converted into electric ener-
gy using the motor as a power generator.
Then a braking force generates and converted
electric energy will be charged to the drive
battery.
l
If you lift your foot off the accelerator
pedal during driving, a braking force that
is equivalent to engine braking of a com-
bustion engine vehicle will be generated.
Also, if you shift the select position into
"B" (BRAKE) from "D" (DRIVE), ef-
fectiveness of the regenerative braking is
getting stronger. Shift the selector lever
into "B" (BRAKE) position according to
the driving condition.
l
When you depress the brake pedal, the
regenerative braking force may be in-
creased.
l
If a problem occurs in the Plug-in hybrid
EV system, or if the ABS and/or the
ASC have been activated, the regenera-
tive braking will be restricted. The foot
brake will still operate.
l
When stronger regenerative braking is
generated, the stop lamps will illuminate
even when the brake pedal is not de-
pressed.
Operation of gasoline engine
E00203700098
l
Even when the vehicle is driving in EV
drive mode, it may be automatically
changed to series hybrid mode or paral-
lel hybrid mode in the following cases:
• The plug-in hybrid EV system is too
hot or too cold.
• Quick acceleration is applied.
• The air conditioner is operating.
• The accelerator pedal is depressed
hard on an uphill road or expressway.
• In cold weather.
• The vehicle has not been refueled for
a long time.
• The drive battery level is low.
In addition to the above, there are more
cases where EV drive mode is automati-
cally changed to series or parallel hybrid
mode.
OGGE19E1
Plug-in Hybrid EV System
l
Even while the vehicle is stopped, the
engine may automatically be started in
the following cases:
• The drive battery level is low.
• The plug-in hybrid EV system is too
hot or too cold.
• The air conditioner is used.
• The vehicle has not been used for a
long time.
• The engine has not been operated for a
long time.
• Refuelling has not been performed for
a long time.
General information
2
2-03

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents